Example: SSL Certificate - Generate a Key and CSR

Important: This example is intended to provide general guidance to IT professionals who are experienced with SSL requirements and configuration. The procedure described in this article is just one of many available methods you can use to generate the required files. The process described here should be treated as an example and not as a recommendation.


When you configure Tableau Server to use Secure Sockets Layer (SSL) encryption, this helps ensure that access to the server is secure and that data sent between Tableau Server and Tableau Desktop is protected.

Tableau Server uses Apache, which includes OpenSSL(Link opens in a new window). You can use the OpenSSL toolkit to generate a key file and Certificate Signing Request (CSR) which can then be used to obtain a signed SSL certificate.

Note: Beginning in Tableau Server versions 2021.3.26, 2021.4.21, 2022.1.17, 2022.3.9, 2023.1.5, and later, Tableau Server runs OpenSSL 3.1.

Steps to generate a key and CSR

To configure Tableau Server to use SSL, you must have an SSL certificate. To obtain the SSL certificate, complete the steps:

  1. Generate a key file.
  2. Create a Certificate Signing Request (CSR).
  3. Send the CSR to a certificate authority (CA) to obtain an SSL certificate.
  4. Use the key and certificate to configure Tableau Server to use SSL.

You can find additional information on the SSL FAQ page(Link opens in a new window) on the Apache Software Foundation website.

Configure a certificate for multiple domain names

Tableau Server allows SSL for multiple domains. To set up this environment, you need to modify the OpenSSL configuration file, openssl.conf, and configure a Subject Alternative Name (SAN) certificate on Tableau Server. See For SAN certificates: modify the OpenSSL configuration file below.

Generate a key

Generate a key file that you will use to generate a certificate signing request.

  1. Run the following command to create the key file:

    openssl genrsa -out <yourcertname>.key 4096

    Notes:
    • This command uses a 4096-bit length for the key. You should choose a bit length that is at least 2048 bits because communication encrypted with a shorter bit length is less secure. If a value is not provided, 512 bits is used.
    • To create PKCS#1 RSA keys with Tableau Server versions 2021.3.26, 2021.4.21, 2022.1.17, 2022.3.9, 2023.1.5, and later, you must use the additional option -traditional when running openssl genrsa" command based on the OpenSSL 3.1. For more information about the option, see https://www.openssl.org/docs/man3.1/man1/openssl-rsa.html(Link opens in a new window).

Create a certificate signing request to send to a certificate authority

Use the key file you created in the procedure above to generate the certificate signing request (CSR). You send the CSR to a certificate authority (CA) to obtain a signed certificate.

Important: If you want to configure a SAN certificate to use SSL for multiple domains, first complete the steps in For SAN certificates: modify the OpenSSL configuration file below, and then return to here to generate a CSR.

  1. Run the following command to create a certificate signing request (CSR) file:

    openssl req -new -key yourcertname.key -out yourcertname.csr  -config /opt/tableau/tableau_server/packages/apache.<version>/conf/openssl.cnf

  2. When prompted, enter the required information.

    Note: For Common Name, type the Tableau Server name. The Tableau Server name is the URL that will be used to reach the Tableau Server. For example, if you reach Tableau Server by typing tableau.example.com in the address bar of your browser, then tableau.example.com is the common name. If the common name does not resolve to the server name, errors will occur when a browser or Tableau Desktop tries to connect to Tableau Server.

Send the CSR to a certificate authority to obtain an SSL certificate

Send the CSR to a commercial certificate authority (CA) to request the digital certificate. For information, see the Wikipedia article Certificate authority(Link opens in a new window) and any related articles that help you decide which CA to use.

Use the key and certificate to configure Tableau Server

When you have both the key and the certificate from the CA, you can configure Tableau Server to use SSL. For the steps, see Configure External SSL.

For SAN certificates: modify the OpenSSL configuration file

In a standard installation of OpenSSL, some features are not enabled by default. To use SSL with multiple domain names, before you generate the CSR, complete these steps to modify the openssl.cnf file.

  1. Navigate to the Apache conf folder for Tableau Server.

    For example: /opt/tableau/tableau_server/packages/apache.<version_code>/conf

  2. Open openssl.cnf in a text editor, and find the following line: req_extensions = v3_req

    This line might be commented out with a hash sign (#) at the beginning of the line.

    If the line is commented out, uncomment it by removing the # and space characters from the beginning of the line.

  3. Move to the [ v3_req ] section of the file. The first few lines contain the following text:

    # Extensions to add to a certificate request
    basicConstraints = CA:FALSE
    keyUsage = nonRepudiation, digitalSignature, keyEncipherment

    After the keyUsage line, insert the following line:

    subjectAltName = @alt_names

    If you’re creating a self-signed SAN certificate, do the following to give the certificate permission to sign the certificate:

    1. Add the cRLSign and keyCertSign to the keyUsage line so it looks like the following: keyUsage = nonRepudiation, digitalSignature, keyEncipherment, cRLSign, keyCertSign

    2. After the keyUsage line, add the following line: subjectAltName = @alt_names

  4. In the [alt_names] section, provide the domain names you want to use with SSL.

    DNS.1 = [domain1]
    DNS.2 = [domain2]
    DNS.3 = [etc]

    The following image shows the results highlighted, with placeholder text that you would replace with your domain names.

  5. Save and close the file.

  6. Complete the steps in Create a certificate signing request to send to a certificate authority section, above.

Thanks for your feedback!Your feedback has been successfully submitted. Thank you!